#30 AMP TRAVEL TRAILER CONVERTER INSTALL#
#30 AMP TRAVEL TRAILER CONVERTER FULL#

This solar array is managed by the Victron SmartSolar MPPT 100|50 and remaining products include the wires, solar disconnect breaker, solar disconnect breaker box, lugs, ferrules, heat shrink and everything else needed to make the full solar panel array to busbar assembly. The dimensions are listed on their respective product pages. Choose your solar panels based on their physical dimensions and which ones work with your own specific setup. There are three options for solar panels in this list and they will all work well for this particular diagram. This section contains all of the parts necessary to wire 6x100w solar panels into your camper electrical system as shown in the diagram above and must be added to the master shopping list at the top of this blog post.

#30 AMP TRAVEL TRAILER CONVERTER INSTALL#

This parts list does not include means to attach the solar panels to the roof as that veries GREATLY from install to install. This solar array is managed by the SmartSolar MPPT 100/30 and remaining products include the wires, solar disconnect breaker, solar disconnect breaker box, lugs, ferrules, heat shrink and everything else needed to make the full solar panel array to busbar assembly.

This section contains all of the parts necessary to wire 4x100w solar panels into your camper electrical system as shown in the diagram above and must be added to the master shopping list at the top of this blog post.

The link for 6 AWG Triplex Wire below has 3 wires inside, which is correct for the application. the 6/3 w/ ground wire you will find at your local hardware store will very likely have 4 wires in it, which is unnecessary. This much power coming from the Inverter/Charger requires 6 gauge wire feeding a 50A main breaker in the AC distribution panel. 6/3 stranded wire is used here because although our shore power is 30A max, which 10 gauge wire is adequate for, the PowerAssist function of the Victron Multiplus Inverter Charger can add up to 3000w of battery power to shore power in the event that more power than the shore power can provide is needed. This section includes the wiring necessary to connect the inverter charger to the AC side of the AC-DC power distribution panel listed in an earlier section. The Battery monitor allows you to know how full your batteries are, know how much power you are actively gaining or losing, and see the historical data of your power usage. The busbar is essentially an extension of the battery terminals and allows you to deliver power where it needs to go and houses the fuses necessary to protect the wires leaving the busbar. The busbar itself as well as the shunt for the battery monitor and fuse mounted inside to the busbar protecting the positive wire from overcurrent can be found in this section. This section contains all of the parts necessary to wire the battery bank to the main DC distribution busbar.

Rated for 125 Volts/ 3750 Watts.Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC charger

High Performance: Made from 100% copper wires for optimum conductivity.

It is made of flame retardant heavy duty PVC sheath to protect it from wear and tear.

Flexible Design: The cord is very flexible.

Coverts Electrical Connection Type: Adapts the electric connection of the campground to your RV's amperage.

Practical Design: Strong and flexible, the black and orange RV power converter measures 12' long and weighs 1lb, with a flexible dog bone design.

Easy to Use: Substantial plugs on both ends allow for a strong and comfortable grip when attaching or removing the charger adapter cord.

Weather Resistant: The STW electrical cord is finished with a thick, durable coating, making the power adaptors ideal for long-term use in both hot and cold conditions.

Dogbone Adapter: The electrical power adapter is a safe converter from 30 AMP Male (TT-30P) to 50 AMP Female (14-50R), and is rated 125V/3750W.

Power Converter: Be sure you can plug in your motorhome or RV camper at any motor park, camp ground or recreational area.

It enables you to connect the amperage of your RV to the power pedestal at the campground as stated in the conversion specs of this unit. It is made of 100% copper with a PVC sheath that is fire retardant. The adapter is rated for 125 V / 3750 Watts. The Hebron dogbone adapter has a clean and sleek design, which makes it easier to plug in and unplug without causing damage. Hebron RV Power Converter - 30 Amp Male to 50 Amp Female Dogbone Adapter

30 amp travel trailer converter